| Input |
| Capacity |
2000VA/1200W |
| Voltage Range (220V) |
140~300VAC |
| Frequency |
50/60Hz (Auto sensing) |
| Phase |
Single phase |
| Socket |
With Fuse |
| Cold Start |
Press the ON/OFF switch (0%~100% load) |
| Output |
| Rating Capacity |
2000VA |
| Rating Power |
1200W |
| Waveform |
Waveform Battery mode (Simulated Sinewave) AC mode (Sinewave) |
| Power Factor |
0.6 |
| Rating Voltage |
220VAC |
| AC Voltage Regulation |
±10% (Battery mode) |
| Rear Output Socket |
4 x Universal (Battery backup) |
| Output Frequency |
| Rating Frequency |
50/60Hz±1Hz |
| Line Mode |
Synchronize with the utility |
| Environment |
| Tempreature |
0˚C~40˚C |
| Humidity |
0%~90%RH (Non-condensing) |
| Noise Level |
Less than 45dB |
| Indicators |
| AC Mode |
Green lighting |
| Battery Mode |
Yellow flashing |
| Fault |
Red lighting |
| Physical |
| Dimensions (WxDxH) (mm) |
390 x 125 x 225 |
| Net Weight (kg) |
13.4±0.3 |
| Transfer Time |
Typical 2~6ms (Max 10ms) |
| Communication Interface |
USB/RJ11 (Optional) |
| Battery & Runtime |
| Rating Voltage |
12V/9AH x 2 |
| Recharge Time |
6-8 hrs recover to 90% capacity |
| Change Current |
About 1A at Normal mode |
| Short Circuit Protection |
| Line Mode |
Fuse & firmware protection |
| Battery Mode |
Firmware protection |
| Overload Protection |
| Line Mode |
Load<110%±5% go to fault mode after 5 mins |
| Load<120%±5% go to fault mode immediately |
| Battery Mode |
Load<110%±5% shut down after 5 secs |
| Load<120%±5% shut down immediately |
| Protection |
| Full Protection |
Overload, discharge & overcharge protection |
| Alarm |
| Battery Mode |
Sounding every 10 secs |
| Low Battery |
Sounding every sec |
| Overload |
Sounding every 0.5 sec |
| Fault |
Continuously sounding |
| Management |
| Compatible with OS |
Supports Windows® 2000/2003/XP/Vista/2008/7/8.1/10 |
